ELECTRONIC IGNITOR

Electronic ignition transformer working at high frequency to save space and weight
TRK2 – 15 kV, 30mA, 33% duty cycle




TRK2 inside

2 PARKER SCREWS 4,2 x 38 mm


TRK2 on back side

2 PARKER SCREWS 4,2 x 38 mm


2 independent electrodes 

The high voltage creates a spark between the ignition electrode and burner ground.

The flame current flows from the dedicated electrode into the control unit.


BLUE WIRE

NEUTRAL

CONNECT TO TERMINAL 07

BLACK WIRE

PHASE

CONNECT TO TERMINAL 08

YELLOW GREEN

GROUND

CONNECT TO GROUND

1 shared electrode 

A single electrode used for both ignition and flame detection.

Electrode switched to ground during the ignition. The flame current flows from the electrode through the secondary winding into the control unit.


BLUE WIRE

NEUTRAL

CONNECT TO TERMINAL 07

BLACK WIRE

PHASE

CONNECT TO TERMINAL 08

YELLOW GREEN

GROUND

CONNECT TO TERMINAL 10

THE LENGTH OF THE HIGH VOLTAGE CABLE MUST BE WITHIN 2 METERS