|
|
Automatic
Burner Controls |
|
|
||
Quad A Integrated single stage BURNER CONTROL UNIT with direct ignition up to 350 kW. IP67 ALUMINIUM enclosure for harsh industrial application, can use UV tube detectors, electrodes and single electrode shared between flame detection and ignition. Single microprocessor with complete self diagnostic for device and burner malfunction detection. Flame signal strength meter for easy tuning and maintenance. Since times and cycle are completely programmable, the same device is suitable for several GAS, OIL and MIXED burners. TraxBus embedded for remote control through hostile environments featuring easy wiring and low-cost. Low profile base available on request. EN298 EC type certification CE-0085BM0346 (DVGW) EN746-2 Conformity lab report GE2825 (TÜV) |
||
|
Retail price 158 Euro |
|
QUAD technical
literature B1400eng.PDF |
|
|
|
|
QUAD promo P1400eng.PDF |
|
|
|||
|
|
|||
|
||
Quad P Integrated single stage BURNER CONTROL UNIT with direct ignition up to 350 kW. IP67 PLASTIC housing for fast application in light industry, can use UV tube detectors, electrodes and single electrode shared between flame detection and ignition. Single microprocessor with complete self diagnostic for device and burner malfunction detection. Flame signal strength meter for easy tuning and maintenance. Since times and cycle are completely programmable, the same device is suitable for several GAS, OIL and MIXED burners. TraxBus embedded for remote control through hostile environments featuring easy wiring and low-cost. EN298 EC type certification CE-0085BM0346 (DVGW) EN746-2 Conformity lab report GE2825 (TÜV) |
||
|
Retail price 158 Euro |
|
QUAD technical
literature B1400eng.PDF |
|
|
|
|
QUAD promo P1400eng.PDF |
|
|
|||
|
|
|||
|
||
UV4s UV4s is an high performance selected UV detector suitable for flame detection for gas, oil and mixed burners. UV4s is a compact unit for industrial use, the body is made of thermal isolating material to avoid sensor overheating. Operating temperature from -40 to +90°C, side connector for optional cooling when temperature at peepsight exceed 70°C. EN298 EC type certification CE-0085BM0346 (DVGW) EN746-2 Conformity lab report GE2825 (TÜV) |
||
|
Retail price 118 Euro |
|
UV4s technical literature B1450eng.PDF |
|
|
|
|
UV4s
promo P1450eng.PDF |
|
|
|
|||
|
||
PAD1 Pocket adapter. Converts internal service port of Burner Control Units to standard interface EIA-232 Requires no power supply. |
||
|
Retail price 26 Euro |
|||
|
|
|||
|
Copyright © 2001 Contrive S.r.l. - Italy |