|
versions
|
|
Q2 is available in 4 versions, the following table shows the features integrated in each version.
For all versions 2 supply voltages are available.
|
|
|
Q21
|
Q22
|
Q26
|
Q28
|
|
1st stage fuel valve
|
|
|
|
|
|
2nd stage fuel valve
|
|
|
|
|
|
2nd flame sensor
|
|
|
|
|
|
Hi temperature bypass / Flameless
|
|
|
|
|
|
UV electro optical shutter control
|
|
|
|
|
|
Safety fuel valve
|
Valve Proving System
|
|
|
|
|
|
Bypass fuel valve
|
|
|
|
|
|
Fuel pressure switch input
|
|
|
|
|
|
Safety valve proof of closure
|
|
|
|
|
|
Air valve
|
|
|
|
|
|
Air pressure switch
|
|
|
|
|
|
Actuator (3 points control)
|
|
|
|
|
|
Actuator potentiometer
|
|
|
|
|
|
ORDER CODE

|
- Interface boards are independent units installed in the base, the two units communicate via infrared optical interface and share only power from the mains.
- Controls shall provide the degree of protection against ingress of water and dust appropriate to their IP classification when mounted and used in the declared manner (EN 60730-1 ยง 12.1.1).
|
|
Please perform the following tasks after receiving the product:
- Inspect the unit: If the product appears damaged upon receipt, contact the shipper immediately.
- Verify receipt of the correct power supply voltage by checking the label.
- Contact your supplier if you received the wrong model or the device does not work properly.
|