PARAMETRIC BURNER CONTROLLER


Parametric... what does it means?

... that it is possible to "tailor" the operation of Q2 to virtually any burner application technology, modifying parameters and behaviour in each stage of the burner management cycle, activating and assigning a predefined duration to each one.


that means

... for each stage you can define which fuel or air valves to turn on, choose which inputs to control, predefine an actuator position that controls the air or gas flow ...


... then it will be simple to configure Q2 to manage:


• SINGLE STAGE DIRECT IGNITION UP TO 350kW

• MULTISTAGE OF UNLIMITED CAPACITY

• INTERMITTENT OR CONTINUOUS OPERATION

• ON/OFF OR MODULATING

• FLAMELESS

• STAGED GAS

• STAGED AIR

• RECUPERATIVE

• REGENERATIVE


Here is a summary list of Q2 features:

• Supports natural and forced draught gas burners.

• Blue flame oil burners.

• Hydrogen burners

• Single stage burners.

• Multi-stage burners.

• Permanent operation.

• Air pressure switch.

• Fuel pressure switch.

• Proof of closure input.

• Up to 4 fuel valves.

• Air valve or fan output.

• Valve proving system (tightness control).

• Flame detection by means of UV sensor, dual or single electrode.

• Optional 2nd UV flame detector.

• Independent and configurable flame sensitivity.

• Electro-optical shutter control.

• Ignition transformer can be housed inside.

• 3 points actuator with preset positions and remote modulation control.

• High-temperature mode for indirect flame surveillance and flameless operation.

• Built-in fieldbus control, IIoT ready.

• Front magneto-optic jack for configuration and commissioning.

• LED-bar flame signal indicator.

• Advanced self-diagnostic report of cycle status, lockouts and failures.

• Log memory for lockouts, faults, unit and valves operating time.


ANY ILLUSTRATIONS, PHOTOGRAPHS, OR EXAMPLES USED IN THIS MANUAL ARE PROVIDED AS EXAMPLES ONLY AND MAY NOT APPLY TO ALL PRODUCTS TO WHICH THIS MANUAL IS APPLICABLE. THE PRODUCTS AND SPECIFICATIONS DESCRIBED IN THIS MANUAL OR THE CONTENT AND PRESENTATION OF THE MANUAL MAY BE CHANGED WITHOUT NOTICE TO IMPROVE THE PRODUCT AND/OR THE MANUAL.

PRODUCT NAMES, CORPORATE NAMES, OR TITLES USED WITHIN THIS DOCUMENT MAY BE TRADEMARKS OR REGISTERED TRADEMARKS OF OTHER COMPANIES, AND ARE MENTIONED ONLY IN AN EXPLANATORY MANNER TO THE READERS’ BENEFIT, AND WITHOUT INTENTION TO INFRINGE.

WHILE EVERY EFFORT HAS BEEN MADE TO MAKE SURE THE INFORMATION IN THIS DOCUMENT IS CORRECT, CONTRIVE CAN NOT BE LIABLE FOR ANY DAMAGES WHATSOEVER FOR LOSS RELATING TO THIS DOCUMENT.


© COPYRIGHT 2025 CONTRIVE SRL ITALY. ALL RIGHT RESERVED.