TRAXBUS


Security Level

Definition

Estimated Value

Rationale

SL-C Component

Intrinsic security capability of the TraxBus interface

SL0 / SL1

The TraxBus protocol achieves SL1 due to resistance against accidental errors obtained through the use of a checksum.

SL-T 

Target System

Security level achieved by the Zone/Conduit

SL2

The system reaches SL2 if compensatory measures are adopted at the network level (segregation, Firewall, VPN) that protect against attacks with simple resources and low motivation. SL3 can only be achieved by encapsulating the data in an encrypted communication with end-to-end authentication.


TraxBus (like Modbus), as a "Clear Text" protocol, can achieve a target security level (SL-T) of SL2 if it operates in a segregated network that uses firewalls or VPNs for public access.


Foundational

Requirement

SL-C
Component Capability

Network Measures

SL-T
Target Level Achieved

FR1 - IAC

Identification and Authentication Control 

Absent

Anonymous communication.

VPN/IPsec or TLS on the Conduit to authenticate connecting devices, IP/MAC filtering on the Firewall.

SL2

Implicit network and/or cryptographic authentication

FR2 - UC

Use Control

Absent

All commands are possible.

Firewall with Deep Packet Inspection (DPI) to filter TraxBus commands.

SL2

Use Control at the network level (Conduit)

FR3 - SI

System Integrity

Absent

No cryptographic protection.

VPN/IPsec to ensure cryptographic integrity of the message payload (prevention of intentional manipulation).

SL2

Integrity ensured by the transport layer

FR4 - DC

Data Confidentiality

Absent

No cryptographic protection.

VPN/IPsec to ensure cryptographic integrity of the message payload (prevention of intentional manipulation).

SL2

Integrity ensured by the transport layer

FR5 - RDF

Restricted Data Flow

Absent

Clear-text data.

VPN/IPsec to encrypt traffic entering/exiting the IACS Zone.

SL2

Confidentiality provided by the Conduit

FR6 - TRE

Timely Response to Events

Absent

No security logging.

Logging and Monitoring on the Firewall/IPS to record denied access attempts, filtered commands, and other anomalies.

SL2

Provided by perimeter security tools

FR7 - RA

Resource Availability

Weak

Vulnerable to DoS.

Rate Limiting and Session Management on the Conduit Firewall to block flooding of requests toward devices.

SL2

Protection from simple denial-of-service attacks


The security strategy is defined by the deployment environment:

  • Segregated Industrial Environment: In the absence of network countermeasures, the TraxBus interface is suitable only for communications within segregated areas (no public network access). In this context, it meets the requirements for SL0 or SL1 levels.
  • External Network Extension: If control or access is extended to external networks (IT or Cloud), a dedicated Conduit must be implemented to achieve a System Target Security Level (SL-T) of SL2 or SL3.