QNET USB


Internal USB configuration interface, no password required. Access requires enclosure disassembly with specialized tools and a controlled power-down/power-up procedure into configuration mode.


Foundational

Requirement

SL-C
Component Capability

Network Measures

SL-T
Target Level Achieved

FR1 - IAC

Identification and Authentication Control 

The device technically grants full access upon physical connection. Security relies only on physical barriers (enclosure) and procedure (power cycle), not user identity.

Isolated Interface

SL1

FR2 - UC

Use Control

Absence of authentication, no Role-Based Access Control (RBAC). The attacker gains full admin privileges. Disincentive is high because they cannot restore original parameters.

Isolated Interface

SL1

FR3 - SI

System Integrity

SL3: Integrity is guaranteed by the absolute physical confinement of the USB port and the point-to-point connection. Data transmission cannot be tampered with remotely.

Isolated Interface

SL3

Guaranteed by physical integrity

FR4 - DC

Data Confidentiality

SL3: Confidentiality is guaranteed by absolute physical segregation. Data is never exposed to a network or clear-text sniffing outside the secure enclosure.

Isolated Interface

SL3

Guaranteed by physical segregation

FR5 - RDF

Restricted Data Flow

SL4: The interface is permanently isolated from the network. The power-cycle procedure ensures configuration flow is strictly separated from operational flow.

Isolated Interface

SL4

Maximum possible restriction by design

FR6 - TRE

Timely Response to Events

The host records the communication failure (lockout event), creating an undeniable audit trail of the physical intrusion attempt.

Isolated Interface

SL3

Logging capability managed by the host. Assuming communication timeout has been enabled.

FR7 - RA

Resource Availability

SL3: Availability is secured by physical robustness and the procedural disincentive: any configuration change by an attacker will likely cause a system shutdown due to incorrect parameters, halting the attack.

Isolated Interface

SL3

Protected by physical and procedural robustness. Assuming communication timeout has been enabled


The overall system is highly resistant to SL2 or higher attack patterns despite the interface having inherent weaknesses.

Security is enforced through physical confinement and mandatory procedural logging. An attacker must perform detectable, invasive, and high-risk physical maneuvers. In an industrial setting, these "mechanical" barriers effectively compensate for the lack of local encryption or passwords.