QIO HTTP


Optional webserver for remote supervision operating in segregated Industrial Network, restricted access to authorized personnel only.


Foundational

Requirement

SL-C
Component Capability

SL-C
Component Level Achieved

FR1 - IAC

Identification and Authentication Control 

Access requires physical proximity to the device, and dual authentication: 

1) WPA3-Personal (link layer) 

2) Encrypted credentials via HTTPS (application layer).

SL2

WPA3 and TLS provide multi-layered cryptographic protection.

FR2 - UC

Use Control

Control based on firmware RBAC and automatic session closure after 5 minutes of inactivity.

SL3

Inactivity timeout and session management strengthen resource control.

FR3 - SI

System Integrity

HTTPS (TLS) provides end-to-end integrity for the application data, preventing tampering.

SL3

The combination of WPA3 and TLS ensures high message integrity..

FR4 - DC

Data Confidentiality

Credentials and configuration data are encrypted via HTTPS (Port 443) using a self-signed certificate.

SL3

TLS ensures confidentiality even if the link layer is bypassed.

FR5 - RDF

Restricted Data Flow

The device can operate as an AP (creating an isolated logical boundary) or as a STATION (connecting to a segregated Industrial Network).

SL3

Flow restriction is guaranteed by the ability to act as an AP (creating a closed segment) or by relying on the segregation of the external Industrial Network when operating as a STATION.

FR6 - TRE

Timely Response to Events

Entering the wrong password 5 consecutive times causes a controlled lockout, and the event is recorded in non-volatile memory.

SL3

Fully satisfied by the lockout and logging function of the host.

FR7 - RA

Resource Availability

Protection against DoS is strengthened by WPA3 and the host lockout function. TLS overhead is managed by the host.

SL3

Resilience is maintained through link-layer protection and controlled application suspension.


EN 18031 Risk Assessment


Vulnerability Classes

Level

EN 18031 Requirement

Firmware and Code Integrity

N/A

NOT APPLICABLE - QIO does not support remote firmware updates.

Data Confidentiality / Integrity

LOW

HTTPS guarantees data encryption, no sensitive data or personal credentials are handled.

Communication Integrity / Authenticity

MEDIUM

HTTPS secures the channel. Residual identity risk (spoofing) due to self-signed certificates is accepted in LAN environments.

Protocol Robustness / Validation

LOW

Strict "Allow-list" command parsing prevents code execution, command injection, or unauthorized protocol manipulation.

Credential / Secret Protection

LOW

Session-based auth over encrypted channel. WPA3 credentials are hardware-protected (Secure Element). Meets EN 18031-1 storage standards.

Access and Use Control

LOW

HTTPS prevents session hijacking. The attack surface is minimized by the extremely limited set of supported commands.

DoS (Denial of Service)

MEDIUM

Resource saturation (HTTPS flood) may cause Webserver downtime, but core operational functions remain unaffected and isolated.


The use of the webserver depends on the network perimeter in which it is deployed:

  • Segregated Industrial Environment: It can remain active without additional measures.
  • External Network Access: The webserver can remain active provided that the system is protected by a Conduit that fulfills the necessary security requirements (VPN/IPsec, DPI).
  • Maximum Protection (Hardening): If an adequate Conduit cannot be guaranteed, or for high-criticality applications, the webserver can be completely disabled. This action eliminates the attack vector at its source, neutralizing the risk of unauthorized access via the web interface