CONTROLLED SHUTDOWN

The burner was switched off with remote control.


The fuel valves are deactivated with the exception of the VB output, for which it is possible to define the behaviour (for example it could be the discharge valve in regenerative burners).


It is also possible to set the behaviour of the air valve and possibly the position of the actuator.

The air pressure switch can be enabled to detect air failure or air simulation, depending on air output setting.

The fuel pressure switch can be enabled to detect fuel failure or fuel simulation, depending on fuel output setting. Response times of the air and fuel pressure switches are adjustable (to tolerate short drops or spikes).


The flame surveillance can be activated to identify possible flame simulation (illegal detection).


It is possible to prevent restarting the burners too quickly by setting a minimum shutdown duration (for example, to avoid pauses which are too short in burners with impulsive regulation).


Allowed remote commands

H R S s A a O o f L D d Dxx