BurnerControl
TraxGateway
TraxBus
Protocol converter from TraxBus
to PROFIBUS-DP
WIRING
WIRING DIAGRAM
N • POWER SUPPLY NEUTRAL
L • POWER SUPPLY PHASE
G • PROTECTIVE EARTH
+ • TRAXBUS POSITIVE
– • TRAXBUS NEGATIVE
DATA LINE B IS POSITIVE WITH RESPECT TO DATA LINE A WHEN TRAXGATEWAY IS TRANSMITTING 1
TECHNICAL
DATA
POWER SUPPLY
VOLTAGE115 or 230 V
FREQUENCY50 / 60 Hz
LINE FUSE1 A
POWER CONSUMPTION35 VA
TERMINALS2x2,5 mm²
ENVIRONMENT
OPERATING TEMPERATURE-10...70°C
STORAGE TEMPERATURE-25...85°C
PROTECTION CLASSIP20
RELATIVE HUMIDITY5...95%
MOUNTING POSITIONANY
TraxBus INTERFACE
BAUD RATE4800, 9600, 19200, 38400
BUS VOLTAGE24 Vdc MAX
ALLOWED LINE DROPOUT3 Vdc MAX
LINE CAPACITANCE100nF MAX
ALLOWABLE PERIPHERALSup to 120
TERMINALS2x2,5 mm²
PROFIBUS-DP V0
BAUD RATEAUTO 9600...12M bit/s
PHYSICAL LAYERRS-485
TERMINALS2x1,5 mm²
;)
DEVICE
LAYOUT
B1360.00.01 EN • TraxGateway
Installation manual
TraxGateway • GSD file
(General Station Description)
LITERATURE
UTILITIES
NETWORK
1 • FROM MAIN POWER SUPPLY
2 • FROM PROFIBUS MASTER
3 • TO NEXT PROFIBUS SLAVE
DIMENSION
TraxGateway N
;)
EPOXY COATED ALUMINIUM
200 x 120 x 71 mm • 1130 g
TraxGateway A
;)
STANDARD ALUMINIUM
200 x 120 x 92 mm • 1800 g
TraxGateway B
;)
LOW PROFILE ALUMINIUM
200 x 120 x 71 mm • 1400 g
TraxGateway P
;)
POLYCARBONATE UL-V0
200 x 120 x 96 mm • 1200 g