BurnerControl
Configuration
Complements
Read and write BCU parameters
Monitor and debug TraxBus networks
Pad.USB + PC USB
;)
Read and write parameters using QPro running on a Windows® PC.
TraxBus interface at main terminal board is disabled while Pad.USB is linked to internal Quad soket.
Pad.USB • Operating Instruction
TraxInterface + PC 232
;)
Read and write parameters using QPro running on a Windows® PC. One (or more) Quad are connected to TraxBus and linked using TraxInterface.
Configuration should be made on a single unit while all burners are swiched off.
TraxInterface • Product description
TraxGateway + PC USB
;)
Read and write parameters using QPro running on a Windows® PC. One (or more) Quad are connected to TraxBus and linked using TraxGateway local USB interface. Configuration should be made on a single unit while all burners are swiched off.
TraxGateway • Product description
Palmarino.SOCKET
;)
Palmarino is suitable to change TraxBus address, available also for link to BCU internal socket.
Palmarino • Operating Instruction
Palmarino.232 + TraxInterface
;)
Palmarino is suitable to change the TraxBus address. Specific RS232 interface version can be used when one or more BCUs are connected to TraxInterface.
Palmarino • Operating Instruction
Palmarino.TRAX
;)
Palmarino is suitable to change the TraxBus address. Specific version is availble for direct connection to BCUs main terminal board (1 device only).
Palmarino • Operating Instruction
QPro • Configuration tool installer
QPro • Helpfile installer